TOS VARNSDORF W100A TABLE TYPE HORIZONTAL BORING MILL (2023)

#50 Taper Spindle with Power Tool Clamp
23” Diameter Built In Facing Head
Hardened Guideways
Threading Capable
5-Axis DRO with linear scales
B-Axis rotary encoder and feedback on DRO
Tail Stock
All available manuals

SCOPE OF MACHINE REBUILD
• Complete disassembling of machine, cleaning of parts, exchange of defected parts
• Headstock – Inspection of spindle taper ISO 50 and regrind as required.
• Inspect and confirm condition of all bearings, gears, and shifter mechanism.
• Inspect main spindle bearings and bronze bushing.
• Inspect and repair of face plate if required.
• Scraping of all gibs and correct geometry for X, Y, Z
• Inspect power tool clamping system,
• Inspect and recondition hydraulic system.
• Way surfaces Z, Y, X are cleaned, mating slides are milled for resurface, gibs reground and scraped.
• Sliding surface of headstock are scraped.
• Repair of screws, new bolts, new bearing houses as required.
• Re-turning of clamping area of table.
• Tabletop to be reground and scraped.
• New wipers of sliding areas
• Inspect electrical cabinet and replace any defective parts
• Confirm all interconnections wires and harnesses are in good condition.
• New lubrication distribution, including feeders.
• New linear scales and DRO for all axis X, Y, Z, W
• New B axis rotary encoder for B axis
• Surface treatment of machine and new painting, RAL standard (grey color)
• Portable control panel PP100 inspected and repaired.
• Misc. tool holder for facing head
• Tailstock (with motorized mechanical clamping)
• Sliding bush of the outboard support, 80 mm diameter
• Sliding bush of the outboard support, 100 mm diameter
• New way covers.