2023 OM NEO-35SX Vertical Boring Mills (incld VTL) | Olympia Technical Services
Overview
Type:
Vertical Boring Mills (incld VTL)
Manufacturer:
OM
Model:
NEO-35SX
Condition:
New - Build-To-Order
Year:
2023
Status:
For Sale
Description

NEW O-M MODEL NEO-35SX VERTICAL BORING MILL 137.8" TABLE, 157.5" SWING, 80 RPM, TWO 50 HP SPINDLE MOTORS, MAX. WORK HEIGHT 118.1", FANUC 31iT CNC, NEW 2023

Specifications

STANDARD MACHINE SPECIFICATIONS MACHINE CAPACITY Table diameter 137.81" 3,500 mm Maximum turning diameter 157.5" 4,000 mm Maximum swing 157.5" 4,000 mm Maximum turning height 118.13" 3,000 mm Maximum load on table 66,000 lbs 30,000 kg Max. height table top to gauge line 111.0" 3,270 mm Maximum torque of table 73,760 ft-lbs 100,000 Nm Maximum cutting force 6,745 ft-lbs 30,000 Nm CROSSRAIL Elevating travel of cross rail 78.75" 2,000 mm Cross rail positioning step (11 steps) 7.87" 200 mm TOOL HEAD Horizontal travel (X-axis) To right from table center 99.81" 2,535 mm To left from table center 3.94" 100 mm Vertical travel (Z-axis) 59.06" 1,500 mm Ram size (Square) 9.45” 240 mm Minimum boring diameter w/ram 13.0" 330 mm Turning tool shank size 1.25"x1.25" 32mm x 32mm FEEDS AND SPEEDS No. of table speeds 2 (infinitely variable) Table speed range Low 1.0 ~ 29.6 RPM Table speed range High 2.7 ~ 80 RPM Table indexing speed 1 RPM Rapid traverse (X-axis) 393.70 inch/min 10,000 mm/min Rapid traverse (Z-axis) 393.70 inch/min 10,000 mm/min Manual feed rate (X, Z axes) 0~141.75 inch/min 0~3,600 mm/min Cutting feed per rev. 0.0001~1.94" 0.01~50 mm Cutting feed rate 0.04~141.75" 1.0~3,600 mm/min Elevating speed of cross rail 7.88 inch/min 200 mm/min MOTORS Drive motors for turning (cont/30min) 50 HP x 2 (100HP) 37 kW x 2 Axis feed motor X-axis AC servo 5 HP 4.2 kW Axis feed motor Z-axis AC servo 8 HP 6.0 kW ATC magazine motor 1.5 HP 1.2 kW Cross rail elevating motor 20 HP x 6P 15 kW x6P Other motors total 13 HP total 10 kW ATC DEVICE Tool selection system Fixed - address w/shortest path random No. of tools stored 12 pieces Maximum length of tool holder 17.70" 450 mm Maximum weight of tool holder (each) 110 lbs. 50 kg Maximum protrusion of tool stored in magazine(from ram center to tool end) ID side 6.88" 175 mm OD side 6.88" 175 mm MACHINE SIZE Machine weight 108,100 lbs 49,000 kg

Equipped With

 FANUC 31iB CNC Controller  Independent manual 8-jaw chuck table  Twelve (12) tool automatic tool changer  Chip cover (manual open and shut)  Six (6) standard tool holder (includes holder base)  Maintenance tools kit  Foundation parts kit (Includes foundation plates, leveling blocks, and anchor bolts)  Work light  Signal tower light (3-steps LED type) Yellow: When the machine is put in a stationary condition on automatic operation. (M00,M01,M02, or M30 and end of single block) Green: During automatic operation Red: Alarm  Energy saving functions  Electric spare parts  Cross rail traveling  Automatic power-off  X & Z-axis scale feedback  Tandem drive of the table (50HP x 2P)

ONE (1) NEW O-M MODEL NEO-35SX VERTICAL BORING MILL (2023)

ONE (1) NEW O-M MODEL NEO-35SX VERTICAL BORING MILL (2023)
Vertical Boring Mills (incld VTL)